Web Content Viewer
Actions
Updated Crane Agreement Notice

NOTICE

Special Hauling Permits for Self-Propelled Cranes

This notice must be carried in the vehicle at all times during the permitted movement and presented with the permit to be valid. This notice applies to the base carrier vehicle. Boom dolly axles and lift axles are not included in the axle counts below for the sole purpose of determining what items may be part of the movement. The boom dolly axles would be counted when determining weights and must be listed on the special hauling permit.

In keeping with Ohio Administrative Code (OAC) Section 5501:2-1-01, the following are items which may be carried as part of a self-propelled crane that is operating under the authority of an overweight Special Hauling Permit:

Self-Propelled Cranes Up To And Including 6 Axles:

Boom
Jib (or Fly) Block &/or Ball
Counterweights (mounted in operating position &/or loaded on deck)
Auxiliary Hoist with cable
Outriggers (if not equipped with removable outrigger box or if boom removal prevents the outriggers from being removed)
Rigging (items that are reasonable for operation of the machine at a job site such as slings, shackles, cribbing, etc.)
Spare Tire

Self-Propelled Cranes With 7 Axles:

Boom
Jib (or Fly) if no lifting lugs Block or Ball
Auxiliary Hoist with cable
Outriggers (if not equipped with removable outrigger box or if boom removal prevents the outriggers from being removed)
Spare Tire

Self-Propelled Cranes With 8 Or More Axles:

Auxiliary Hoist with cable
Outriggers (if not equipped with removable outrigger boxes)
Spare Tire